services:

lincoln machine polishing or buffing

full colour correction and machine buffing


machine polishing


Following the needs of our customers in this current climate, paintevolution has now developed a new 3 stage compound,glaze and wax system for correcting faded and oxidised paintwork.
Using new technology paintevolution can now restore your colour back to almost showroom condition within 3 hours by cutting back dull or matted paintwork and apply various coats of compound and final glazing to give your pride and joy a new lease of life.

This brand new system will also remove most small to medium scratch marks caused by abrasive car wash brushing and small grazing marks.

The system has a 3 stage process after a full valet :

STAGE 1: FULL EXTERIOR VALET

The car is subject or usual full exterior valet , traffic film remover is applied, jet washed off, the car is then washed by hand , jet washed, hand dried, then tar and glue is removed.

STAGE 2 : WET FLAT AND CLAY BAR:

Depending on circumstances the car will be subject to wet flatting using a variety of “light” grade Mirka or 3M abrasive paper, usually 1500-3000 grade paper, then polished.

Clay barring is then used to ” exfoliate” the vehicle of all fall out and dust particles from the exterior of the vehicle.

STAGE 3: MACHINE COMPOUND:

The vehicle will be machine compounded using farecla products and a lambs wool head to remove any further residue and create a “flat” finish to the vehicles paintwork.

STAGE 4 : 2 STAGE MACHINE POLISH AND WAX:

The residue from the compound stage above is removed and the car is lightly buffed using a foam machine polishing head, followed by a coat of deep wax.

Pricing for this system is relatively small when compared to other systems and can be added to a small paint repair or valet
Please contact your local operator for further details or pricing.


Contact us on 01522 622 002 or  07971 000820

01522 622 002 07971 000 820